Note - Application note applies to firmware version 1.0.7 onwards


The 8104 features a fully configurable ratio mode, allowing users to select the number of samples to take on each set of terminals and the settling time after switching.


To configure these settings from defaults (5 samples on each set of terminals, with 10 samples allowed for settling after switching), follow the instructions below : 


  1. Press the MENU key to enter the main menu
  2. Navigate to RATIO CONFIGURATION and press the ENTER key or push the Digital Control
  3. Select the desired menu item and configure as desired



Press the BACK key to exit the menu and return to the measurement screen